Cardboard micro wave formed by two layers of wavy paper in havana color, covered by two layers of smooth brown paper.
Description
What is it?
The micro wave cardboard is formed by two layers of corrugated brown paper, covered by two layers of smooth brown paper.
Notes for the design
Because of the empty spaces between one wave and the next, corrugated cardboard is not suitable for cutting designs with parts that are too small or detailed.
Dark halos may appear on the back due to the heat of the cut.
Raster engravings are not recommended.
It is not possible to engrave with the light raster mode.
Examples of use
Packaging, boxes, prototypes of different kinds.
Ecological information
100% recyclable.
Gluing, joints and fixings
It can be glued with the most common glues for paper or double-sided tape.
Because of the empty spaces between one wave and the next, corrugated cardboard is not suitable for cutting designs with parts that are too small or detailed.
Raster engravings are not recommended.
Dettagli tecnici
kerf: 0.3 mm
measured on the sample (59.7 mm measured after the drawing cut with 60 mm side)
All values are purely indicative and are subject to variations based on the sheet of material and the position at the time of processing.
