Description
What is it?
The micro wave cardboard is formed by two layers of corrugated brown paper, covered by a layer of smooth brown paper and a layer of white paper.
Notes for the design
Because of the empty spaces between one wave and the next, corrugated cardboard is not suitable for cutting designs with parts that are too small or detailed.
Dark halos may appear on the back due to the heat of the cut.
Raster engravings are not recommended.
It is not possible to engrave with the light raster mode.
Examples of use
Packaging, boxes, prototypes of different kinds.
Ecological information
100% recyclable.
Gluing, joints and fixings
It can be glued with the most common glues for paper or double-sided tape.
Dettagli tecnici
kerf: 0.3 mm
measured on the sample (59.7 mm measured after the drawing cut with 60 mm side)
All values are purely indicative and are subject to variations based on the sheet of material and the position at the time of processing.
